900mm 1500W红外加热灯橡胶中使用的卤素加热灯
在橡胶中使用红外加热灯
1。橡胶硫化过程
2。成型后橡胶干燥和固化
快速干燥：对于某些通过溶液方法或乳液方法制备的橡胶产品，例如浸渍橡胶产品，涂层橡胶产品等，需要在成型后干燥以去除其中的溶剂或水分。红外加热灯可以迅速蒸发这些溶剂或水分并加快干燥速度。例如，当生产橡胶手套时，红外加热灯可用于快速蒸发手套表面的水分，缩短干燥周期并提高生产效率。
3。橡胶的预热和软化
节能效应：与传统的加热方法相比，红外加热灯可以在橡胶预热过程中获得更有效的加热，因为它可以将热量直接转移到橡胶中，从而减少在转移过程中的热量损失。这不仅加快了预热速度，还可以节省能源并降低生产成本。
Quick drying: For some rubber products prepared by solution method or emulsion method, such as impregnated rubber products, coated rubber products, etc., they need to be dried after molding to remove the solvent or moisture therein. Infrared heating lamps can quickly evaporate these solvents or moisture and speed up the drying speed. For example, when producing rubber gloves, infrared heating lamps can be used to quickly evaporate the moisture on the surface of the gloves, shorten the drying cycle, and improve production efficiency.
Curing coatings and adhesives: After applying a protective coating on the surface of a rubber product or using an adhesive to bond components, curing is required. Infrared heating lamps can provide appropriate heat to quickly cure the coating and adhesive, enhancing the protective properties and bonding strength of rubber products. For example, in the assembly process of automotive rubber parts, curing the adhesive with an infrared heating lamp can ensure a firm connection between parts.
3. Preheating and softening of rubber
Easy to process: Before the rubber undergoes subsequent molding processes such as extrusion, calendering, and molding, it is very beneficial to use an infrared heating lamp to preheat and soften the rubber. The preheated rubber is easier to deform and can pass through the extruder head, calender roller or mold more smoothly, reducing the difficulty of processing and improving the molding quality. For example, in the rubber extrusion molding process, the rubber material preheated by the infrared heating lamp can be extruded more evenly and reduce surface defects of the product.
Energy-saving effect: Compared with traditional heating methods, infrared heating lamps can achieve more efficient heating during the rubber preheating process because it can directly transfer heat to the rubber, reducing the loss of heat during the transfer process. This not only speeds up the preheating speed, but also saves energy and reduces production costs.
